Characteristics of Allergic Harvest PC

The comprehensive set for the building of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the shape of rolls of 2.1 m in length and a diameter of 60-90 cm. The thickness of this substance is 4 mm.

If you want, you can boost the period of the structure to 6 yards or longer. To try it, it is sufficient to attach a two-meter extension. When choosing a drawing, look closely at the distance between the arches. This figure needs to be 65 cm, and which is the most appropriate length for the specified depth of this material. The width of the doorways based on the maker’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to pick a location for the location. If this is done properly, you can provide yourself with a harvest of fresh veggies for the whole calendar year.

The location for your future greenhouse is marked immediately in the preparation of their garden plot. In order to melt the snow at the place of their greenhouse as soon as possible, the ideal point on the website will be a small elevation. In addition, in this location won’t need to be concerned about higher humidity as soil and air in the construction.

Build a polycarbonate greenhouse on a raised site – intends to look after the best temperature inside.

If it isn’t feasible to place a greenhouse on an elevated position, you will need to pour a layer of fine shattered rock around 20 cm and the identical layer of fertile land to create seedbeds.

Before assembling a greenhouse on your garden plot, it’s also wise to think about where and how this construction will be set up. To begin with, you have to select a location for this. The greenhouse ought to be located at a well-lit area no less than a couple meters away from homes, barns and other structures.

The best way to Put in a greenhouse in Line with the Faces of the world

Be sure to measure the dirt surface – it is best to remove the surface. This will also get rid of weed seeds. And for simplicity of work, eliminate the dirt in an area that’s about a meter wider on each side of the rectangle you desire.

Additionally, it is worth thinking about having a base. As producers say, today most greenhouses do not need it, particularly if they (greenhouses) are used just in the summer and spring period. However, seasoned anglers still recommend making at least a basic basis from a bar. It’s quite simple – it’s sufficient to associate with each other using metal screws and corners four pieces of wood with a cross-section of 10 * 10 cm. The size of such a foundation ought to be equivalent to the foundation of their upcoming greenhouse.

Simple bar foundation

You can also produce a strip base of concrete. He’s more reliable than a pub base, but requires more financial and labour expenses. Incidentally, the greenhouse, that is utilised in winter, without it and don’t do without it at all.

Stages of the formation of a strip base: a schematic representation

Many producers counsel to set up greenhouse structures without creating a base. For this function, they equip the frame with special T-shaped legs, so that the construction was securely fixed. But, as practice shows, it’s still required to construct a foundation: therefore and the basis will be more securely fixed and also the elements of the basis in contact with the ground, will be stored much more in its original condition.

The principal issue is to take care of the material with specific agents to protect the wood from moisture. The substance is installed on concrete blocks that are dug into the soil. For a six-meter arrangement, they need 10 bits: four to either side and one at the center of the ends.

Before you perform the greenhouse itself, you have to select the perfect spot for it. It has to be an even site, so that the frame was found equally, without distortions. It needs to be bright and not obscured by trees or buildings.